Latest activity

What's new New posts Latest activity
  • dingbat
    dingbat replied to the thread Ethanol!.
    I’ve had zero issues with the machines (2 and 4 stroke) since I started stabilizing all fuels and mixes at purchase that are not...
  • Texasmark
    Texasmark replied to the thread cupped prop question.
    Yea Jimmbo we both know that if its cupped, besides the progressive pitch, you can just look at the blade and clearly see the tip of the...
  • Cup420
    Cup420 replied to the thread Ohm specs.
    I figured out the problem...its the carbs. Just waiting on o-rings to rebuild. Most of my jets were clogged, but i'm still trying to...
  • Cup420
    Cup420 reacted to boscoe99's post in the thread Ohm specs with Like Like.
    What is the motor doing or not doing?
  • P
    Pmt133 replied to the thread Questions about the set up of a Holley 4160 on a 4.3 V6.
    Do you even really need it? The choke didn't work on my 3.0l for like 15 years.
  • R
    racerone reacted to Chris1956's post in the thread 80 HP Mercury trim with Like Like.
    Do you have the PTT with the trim pump and reservoir in the boat? If so, you can have one or two solenoids. The UP circuit will...
  • alldodge
    alldodge replied to the thread Ethanol!.
    Might be closer than you think https://www.pure-gas.org/
  • K
    Kosmofreeze reacted to Bondo's post in the thread Sand Ingestion - DP-SM with Like Like.
    Ayuh,..... There's little to no chance of that, with a good functioning system,..... If yer that worried 'bout it, after doing so...
  • redneck joe
    redneck joe replied to the thread Random.
    • 1788094768276.png
  • K
    Kosmofreeze reacted to Jeff J's post in the thread Sand Ingestion - DP-SM with Like Like.
    I pulled the exhaust off a Mercruiser a couple of years ago. There was zero chance the sand packed in there was coming out by flushing...
  • K
    Kosmofreeze reacted to Scott Danforth's post in the thread Sand Ingestion - DP-SM with Like Like.
    A few years back I posted a few flushing nozzles that I made for going in the drain plugs Basically this adapter and a section of 1/4"...
  • C
    Crosbyman replied to the thread Successful Deletion of VST, Primer, & Fuel Pump.
    Powering the FP from the regulator output with a few blocking diodes to prevent feedback B+ from the solenoid should do it & kill the...
  • C
    Chris1956 replied to the thread 80 HP Mercury trim.
    Do you have the PTT with the trim pump and reservoir in the boat? If so, you can have one or two solenoids. The UP circuit will...
  • alldodge
    alldodge replied to the thread Artificial Intelligence.
    The only AI I use is what's offered when I do a search for something, so far free
  • E
    Earl Cordova replied to the thread Ethanol!.
    If I could get E0 that is all I would purchase.
Show older items
Top