Latest activity

  • B
    bigbadchevy89 replied to the thread 1969 buick 225 oddfire.
    I'll check this
  • R
    racerone replied to the thread Any clue what this gunk is?.
    The issue is perhaps the thermostat missing or stuck open.---Help yourself and post model # here !----I can not see / look over your motor.
  • K
    kenny nunez replied to the thread 1969 buick 225 oddfire.
    The 225 distributor was an automotive distributor with the vacuum advance location sealed and the plate stabilized as already mentioned...
  • T
    Tapper54 replied to the thread Stainless Steel Rowboat.
    I too had questions......It is stainless according to an engineer friend who evaluated hardness, welds and other structural characteristics.
  • B
    bigbadchevy89 replied to the thread 1969 buick 225 oddfire.
    Agreed but if I can get one for the right price and work through all my issues I wouldn't mind ordering the dui assembly. I spoke to...
  • M
    Mc Tool replied to the thread Stainless Steel Rowboat.
    I dunno ,I have a friend ( yes I have some 😁) who is a sheetmetal worker , makes a few boat fuel tanks and I recall him saying about...
  • M
    Mc Tool replied to the thread 1969 buick 225 oddfire.
    Whats the diff ? Is the dizzy sealed against fuel vapour . And how hard / expensive would uscg compliancy be .... Just curious 🙂
  • J
    I have a 4.3MPI with serial number: 2A185156. I recently noticed when looking straight down onto the serpentine belt that the power...
    • IMG_7249.jpeg
    • IMG_7192.png
  • M
    Waiting on my toggle bolts to finish the front two seats, got all of the wiring done to all the systems in the boat. Glued cable clips...
  • Bondo
    Bondo reacted to muc's post in the thread 2-4-C with Like Like.
    it's gone --- once available stock is sold engine coupler grease - gone u-joint and gimbal bearing grease - gone Special Lube 101 - gone...
  • O
    I think the bullets are the lesser of two evils on a 45+ year old motor :). I put dialectric grease to help. If it became an issue Ill...
  • Berdink
    Berdink replied to the thread Any clue what this gunk is?.
    I think I've gotten that gunk when I idled in a barrel too long. Is that what that motor calls for? Unless you have a vintage Johnson...
  • jimmbo
    jimmbo replied to the thread 1969 buick 225 oddfire.
    The Vacuum Pot can be removed and the Breaker Plate for the points/sensor fixed in place, however the Jeep distributor would be illegal...
  • alldodge
    alldodge replied to the thread 2-4-C.
    When I get a newer 8.2 with Gen 3 cool fuel I will be changing it over to older Gen 2 or even a Aeromotive (or other) with return to...
  • alldodge
    alldodge replied to the thread 2-4-C.
    Stuff changes, things that don't bring in money is left behind Things that use to be use this or you will damage your drive/motor is...
Top