Hi My gearbox seems to operate well but after changing the oil renewing the washers on the drain plugs etc and about 3 hours operation the oil is all milky again.
I have been told that redoing the seals on these gearboxes are not simple at this age. Is it worth getting it fixed or should I just allow the motor to go until the gearbox wont work or is it worth getting it fixed. The motor goes like the clappers (70kph) and has equal compression on all cylinders except a 5% difference in number 4 cylinder. The contols are a bit sloppy and I need to get them either serviced or replaced.
Would appreciate any opinions on this. I may have a go at doing the seals although I have never done anything like this before.
Thanks in advance for advice or opinions.
I have been told that redoing the seals on these gearboxes are not simple at this age. Is it worth getting it fixed or should I just allow the motor to go until the gearbox wont work or is it worth getting it fixed. The motor goes like the clappers (70kph) and has equal compression on all cylinders except a 5% difference in number 4 cylinder. The contols are a bit sloppy and I need to get them either serviced or replaced.
Would appreciate any opinions on this. I may have a go at doing the seals although I have never done anything like this before.
Thanks in advance for advice or opinions.