xhaust leaking

kriszimm

Cadet
Thread starter
Joined
Aug 16, 2014
Messages
9
I have a 94 crownline with 3.0 mercruiser and its leaking exhaust from between the head and block and it burnt the manifold gasket. Replaced manifold gasket thinking its that nope it burnt the new manifold gasket. Any ideas thanks
 

Fishermark

Vice Admiral
Joined
Oct 19, 2003
Messages
5,627
I have a 94 crownline with 3.0 mercruiser and its leaking exhaust from between the head and block and it burnt the manifold gasket. Replaced manifold gasket thinking its that nope it burnt the new manifold gasket. Any ideas thanks

Not sure where you are describing. Do you mean between the head and the manifold?
 

kriszimm

Cadet
Thread starter
Joined
Aug 16, 2014
Messages
9
I took the manifold off and its coning from between head and block where head gasket is its blowing exhaust out
 

Fishermark

Vice Admiral
Joined
Oct 19, 2003
Messages
5,627
If you are blowing head gaskets, then you either did not torque the bolts down correctly, or you perhaps have a warped head and / or block. You will need to check the head and block for "flatness" and go from there.
 

kriszimm

Cadet
Thread starter
Joined
Aug 16, 2014
Messages
9
Thank you i can take it back to mechanic i just had do the head gasket
 

Fishermark

Vice Admiral
Joined
Oct 19, 2003
Messages
5,627
Safe? How far? That's a tough one to answer without knowing what is blown and why.
 

kriszimm

Cadet
Thread starter
Joined
Aug 16, 2014
Messages
9
This best picture I could get
 

Attachments

  • IMG_20140814_160853.jpg
    IMG_20140814_160853.jpg
    55.6 KB · Views: 0

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,545
Is it safe to drive that way

Ayuh,.... My guess is, the head, or block is eroded from the combustion gases passin' through where it ain't supposed too,....

Continin' to run it, will only cause further damages,....
 
Top