won't kill - should I replace the power pack?

[pbarr]

Perhaps this is a silly question but, should I replace the power pack?

The motor runs fine and the switch is working.

The brown-yellow wire from the kill switch into the power pack is grounding correctly. Is there anything else that could be the problem except the power pack. I have a 9.9 evinrude 1977 2-stroke. The power pack is 18-5758.

Looking for advice. Does someone have the pinout and electrical specs for the power pack??

Thanks in advance.

Phil

 

[ezeke]

Re: won't kill - should I replace the power pack?

The kill wire is black and yellow. Brown and yellow is from the stator or magneto.

 

[Solittle]

Re: won't kill - should I replace the power pack?

And the problem is???

 

[wbeaton]

Re: won't kill - should I replace the power pack?

If the kill switch won't kill the motor then the problem is with the switch not the powerpack.