Just picked up this project boat and need some info. I can't seem to find any specs or information on this. Model plate is Eliminator, serial number 702526.
Any ideas you can provide on where I can find some good data on this would be appreciated.
OK, a month later.. motor has been to mechanic and repaired, running fine. Boat has been stripped and the cap to the transom opened up. Decided to just cut the cap as opposed to lifting the top. Going to use Seacast and do enough to make it durable again. have 2 soft spots in the floor, whole thing needs to be re-wired, patch work on the fiberglass, then paint and re-assembly. Any one have ideas on how to make this all easier let me know. I have found a great deal of info here that has been a lot of help.