what kind of glue ??

[woosterken]

here is a picture of my steering wheel, i have the little inserts for the three spokes
what kind of glue should i use?
the part of the wheel that sticks up is plastic, and so are the inserts

http://s48.photobucket.com/albums/f249/woosterken/?action=view&current=IM000008.jpg

woosterken

 

[Psiclown]

Re: what kind of glue ??

Any plastic safe super glue should do the trick. I used a cheap epoxy from Home Depot for the emblem on my truck grill. Plastic to plastic and never had an issue.

 

[woosterken]

Re: what kind of glue ??

ok ,thank you i thought supper glue mite be to thin
i dont have the wheel off to lay it flat

woosterken

 

[Bob_VT]

Re: what kind of glue ??

Plastic Epoxy........ with that said. I am not fond of the loctite brand stuff and found the duro to be better. The plastic 2 part in the big syringe works great.

 

[Woodonglass]

Re: what kind of glue ??

I Agree wth Bob Duro Plastic Epoxy is the stuff to use. It is like WELDING for Plastic.

 

[woosterken]

Re: what kind of glue ??

ok ,thanks what i was looking for.
it is for the boat in my avatar which is all original, and i sure dont want to loose the little inserts,have no idea where i would find replacements.
do i put the glue on both parts of the wheel and the insert ,waite for it to flash and then press together, or just the wheel or the insert?

woosterken

 

[Woodonglass]

Re: what kind of glue ??

A LITTLE dab on BOTH and put together Immediately, tape it down overnight and your good to go.

 

[woosterken]

Re: what kind of glue ??

ok, thanks much

woosterken