What is this cable? Should it be attached?

tphoyt

Commander
Joined
Jun 10, 2010
Messages
2,299
Looks like a ground cable. You should find yhe other end under transom bricked. Probably a ring terminal.
 

boscoe99

Commander
Joined
Aug 22, 2013
Messages
2,346
Technically it is a bonding cable. A corrosion prevention device. Tries to keep components from having a difference of voltage.

It should be connected. In the photo the bonding wire appears to be missing the end terminal fitting.
 

mike_i

Lieutenant Junior Grade
Joined
Jun 28, 2017
Messages
1,050
agree 100%


Technically it is a bonding cable. A corrosion prevention device. Tries to keep components from having a difference of voltage.

It should be connected. In the photo the bonding wire appears to be missing the end terminal fitting.
 

legalfee

Chief Petty Officer
Joined
May 10, 2018
Messages
426
Yes after some research I discovered it was a bonding wire. I suppose it should have black insulation over it like the other one that is connected. I can't find an O ring on a bolt it should be attached to. If someone could post a pic of one that is attached that would be great.
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
9,403
If you’re able to maybe locate an fuller? engine type serial or model number on your engine, it may help to find and confirm your exact engine parts catalog such as an example using 2023 115A which is probably close enough of a find preforming a online search helped shows Suzuki calling the bond cable a Lead as noted for item numbers 2,3,9 of the following parts guide's.




That appears covered in a sleeve.
1787417063750.jpeg
 
Top