What are these wires for?

KenKen3756

Cadet
Thread starter
Joined
Feb 17, 2018
Messages
6
Does anyone have an idea as to what these wires go to? I was told a power pack which makes sense, but I would love a second opinion. Motor is a 1976 Johnson Powershift 2. If it is a Power Pack could someone direct me to a link or something as to where I could get one of possible? Thanks in Advance!
 

Attachments

  • photo285918.jpg
    photo285918.jpg
    1.5 MB · Views: 0

jbuote

Lieutenant Junior Grade
Joined
Aug 17, 2016
Messages
1,001
Not a pro here, but those sure do look like power pack wires...
You can look at the parts here on iBoats..
Use the shop button, and enter the year, make and model number. Select ignition components and you should find it..

What is your model number anyway?
We can help in that search too..
 

jbuote

Lieutenant Junior Grade
Joined
Aug 17, 2016
Messages
1,001
Also...
Is this new to you?
Power packs (or any other needed part) can be quite expensive..
Might consider trying to do a compression test on that if possible before spending any money on it for a baseline health..

Should be pretty easy I'd think.. Get starter working so you can turn it over for the test..

Maybe one of the pros can help you figure out the best/safest way to do that without power pack or other parts..
Just a thought....
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
The components that are missing are very expensive unless you can find used. Do as said above and run a compression test to make sure you have something to work with. Also check your lower unit for water.
 
Top