What’s this line from the engine?

Johaneriksson9

Cadet
Thread starter
Joined
Dec 21, 2017
Messages
9
HI guys,

Have a Johnson 25 hp 1985. Reference the picture attached. I have this line that’s coming up from the bottom of the engine and ends half way thru the carburetor. Looks like it should be attached to something but can’t figure out where.

Thanks
 

Attachments

  • photo282651.jpg
    photo282651.jpg
    1.1 MB · Views: 0
  • photo282652.jpg
    photo282652.jpg
    934.3 KB · Views: 0
  • photo282788.jpg
    photo282788.jpg
    910.4 KB · Views: 0
  • A6E74250-0BE5-4162-B8D3-1DC7B4D6AC9A.jpeg
    A6E74250-0BE5-4162-B8D3-1DC7B4D6AC9A.jpeg
    910.4 KB · Views: 0
  • 1E7F2486-3EFA-4175-916E-D01CE932C377.jpeg
    1E7F2486-3EFA-4175-916E-D01CE932C377.jpeg
    895.2 KB · Views: 0
  • E16EFD6B-3ED1-424A-8BEF-BC91C596071B.jpeg
    E16EFD6B-3ED1-424A-8BEF-BC91C596071B.jpeg
    927.1 KB · Views: 0
Last edited:

Grub54891

Admiral
Joined
Jun 17, 2012
Messages
6,494
Look at the air box, there should be a fitting it goes to, it gets rid of residual fuel from the air box I think. If I'm wrong, let us know.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
There is no airbox on that motor. I believe that ties into the primer line that goes to the top of the carb. I think it should be a smaller line and it acts as a primer for the lower cylinder. I could be wrong I would look for the fuel routing diagram fort he primer. But definitely not an airbox line.
 

Mohawkmtrs

Chief Petty Officer
Joined
Jan 13, 2010
Messages
571
Flyingscott is right. There is supposed to be a tee connector in the primer line he identified. That unconnected hose goes to the tee.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Looks like it should go to the fitting for the top bearing.----Pictures of that area would help.-----Your 2 pictures are not nearly enuff to decide on this hose.
 
Last edited:

Grub54891

Admiral
Joined
Jun 17, 2012
Messages
6,494
Yup, I thought it had an air box. When I'm wrong, I'm incorrect.... Lol....sorry....
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,699
Looks like it should go to the fitting for the top bearing.----Pictures of that area would help.-----Your 2 pictures are not nearly enuff to decide on this hose.

There is a hose up there
Can't post a picture, must be another one of the 'improvements' to the board
 

Crosbyman

Admiral
Joined
Nov 5, 2006
Messages
6,298
well looking at the parts diagram it does look like the hoses on the side of the 5.5 and 7.5 hp

the hose is used to push oils residues from the lower crankcase back up to the top bearing to keep it oiled.

isn't there a nipple on top of the carb somewhere ?

read the section OIL TUBE TO THE TOP BEARING

http://www.leeroysramblings.com/OMC_6hp.htm
 
Last edited:

Johaneriksson9

Cadet
Thread starter
Joined
Dec 21, 2017
Messages
9
There is no airbox on that motor. I believe that ties into the primer line that goes to the top of the carb. I think it should be a smaller line and it acts as a primer for the lower cylinder. I could be wrong I would look for the fuel routing diagram fort he primer. But definitely not an airbox line.


Thanks for your answer. On the picture attached to this answer you can see the fuel line that goes from the primer to the top of the carb. You’re saying that the line coming from below the cylinders should be attached to the primer as well? As of now from the primer goes two fuel lines. One to the top of the carb and one to the bottom of the carb.
 

Attachments

  • photo282788.jpg
    photo282788.jpg
    910.4 KB · Views: 0

Johaneriksson9

Cadet
Thread starter
Joined
Dec 21, 2017
Messages
9
well looking at the parts diagram it does look like the hoses on the side of the 5.5 and 7.5 hp

the hose is used to push oils residues from the lower crankcase back up to the top bearing to keep it oiled.

isn't there a nipple on top of the carb somewhere ?

read the section OIL TUBE TO THE TOP BEARING

http://www.leeroysramblings.com/OMC_6hp.htm

Yes there is a nipple on top of the carb.. but that nipple is a fuel line from the primer. And the line you’re talking about, the line from lower crankcase to the top I think I’ve found. Added two more pic to this conversation showing what I think is the oil line you’re talking about
 

Attachments

  • photo282802.jpg
    photo282802.jpg
    895.2 KB · Views: 0
  • photo282803.jpg
    photo282803.jpg
    1.9 MB · Views: 0

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Where does the other end of that mystery hose go ???-----Bring the motor over I could figure it out in seconds.-----Might even be there to feed a water pressure gauge.----Without clear pictures I can not help you.
 

Johaneriksson9

Cadet
Thread starter
Joined
Dec 21, 2017
Messages
9
Where does the other end of that mystery hose go ???-----Bring the motor over I could figure it out in seconds.-----Might even be there to feed a water pressure gauge.----Without clear pictures I can not help you.


Here Are three more pics. The line is coming from unterneath the engine/cylinders just aft of the carburetor
 

Attachments

  • photo282825.jpg
    photo282825.jpg
    1.7 MB · Views: 0
  • photo282825.jpg
    photo282825.jpg
    1.7 MB · Views: 0
  • photo282826.jpg
    photo282826.jpg
    2 MB · Views: 0

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Just one more try here.-------Your picture appears to show a hose from the intake manifold to the top bearing.-----The hose from the bottom bearing goes to the top bearing.--Hose FROM the primer splits and one goes to intake manifold and one to top of carburetor.------Someone has this mixed up on your motor.----Be easy to sort this out in seconds if motor was in front of me.----Find a shop to help before running this motor.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Motor looks like a bit of a mishmash of parts. Powerhead is silver - a typically Evinrude color, while belly pan is white, a typically Johnson color. The hose from the nipple on the bottom of the crankcase should go to the top of the crankcase. Depending on the year of parts used, the hose on the intake manifold should run to a similar nub on the intake port cover on the side.
 
Top