Wh-11

imagepeace

Cadet
Thread starter
Joined
Jun 2, 2018
Messages
6
Hi!
Anyone have model num? WH-11 15hp engine from 1965? I looking for some information..
 

Attachments

  • photo292066.png
    photo292066.png
    216.3 KB · Views: 0

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
That model is the " WORKHORSE " motor.---In my opinion it was a way to clear out an inventory of " off brand " motors.-----The ELTO / GALE / BUCCANEER lines -------All maintenance parts are common to the 18 hp of the same year.----It can not be made more clear.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
I think you have to find a " gray haired mechanic " at a shop that still has the paper parts book or " micro fiche " unit with the cards.-----Parts for the 18 hp model are the same?-----What parts or specific information is the poster looking for ??
 

TN-25

Chief Petty Officer
Joined
May 27, 2008
Messages
627
I found & purchased a paper copy of a parts manual for a WH-13 (1967 version) from a place called Black Cat Antiques in Thunder Bay, Ontario, Canada.

Another place to check is Ken Cook Company. They handle all the old Johnson / Evinrude / OMC manuals & parts books older than 2011. I've bought 1950s through 1970s stuff from them.

Yes, the WH-11 is just our old friend the Gale 15 model 15D11 through 15D15 produced 1960-63 (64 in Canada). Johnson & Evinrude continued to produce that Gale-derived 15 (that itself was originally was a 12 that was the original source of the Evinrude 14 which became a 15 that Johnson shared with Evinrude). The WH motors are basically small bore 18s. OMC Canada offered them 1965 through 1968. Some came from Peterborough and some came from Belgium.
 

imagepeace

Cadet
Thread starter
Joined
Jun 2, 2018
Messages
6
THX.. First I like to get a manual, and a part list.. and I need some parts.
 

imagepeace

Cadet
Thread starter
Joined
Jun 2, 2018
Messages
6
Also anyone can suggest a link where I can find online manuals? I find printed one but the postal cost is 157 usd and a book 27. so I find it not realistic ...
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
I have the paper parts manual for a 67 model ---Same thing as 65.-----It has been asked before , what parts do you need ?----Welke onderdelen heeft u nodig ?----What town do you live in ?
 

imagepeace

Cadet
Thread starter
Joined
Jun 2, 2018
Messages
6
I live in Budapest Hungary.. Can you somehow scan the manual? or photocopy it and send it over? I not asking free this..
 

Attachments

  • photo292295.png
    photo292295.png
    213.3 KB · Views: 0
  • photo292296.png
    photo292296.png
    571.7 KB · Views: 0

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Make the plate and the gasket.----Use 3mm thick aluminum or stainless for the plate.----Drain plugs can be found / are the same from 1950 motors to the present day.----The same plugs for more than 50 years.
 

imagepeace

Cadet
Thread starter
Joined
Jun 2, 2018
Messages
6
I did it from thick membrane rubber.. I hope is ok
 

Attachments

  • photo292346.png
    photo292346.png
    791.7 KB · Views: 0
Top