lifeandliberty
Cadet
- Joined
- Jun 28, 2003
- Messages
- 16
I have a 1969 Mercury 350 (S/N 2572263) that refuses to start. First off, I was unable to get a spark from either cylinder. I replaced both magneto coils, condensers, points, spark plugs and spark plug wires. I set the points @ .020 and max spark on #1 cylinder @ .300 btdc. I still only get a weak votlage reading from the spark plug wire(usually 5000vdc) just a small tingle when I hold the wire. I cleaned the stator really good with same results. I've replace everything! Any ideas on where to go from here!!