All, I have a 25hp '72 Evinrude tiller (outboard) and the motor only runs up to about 5hp max before coughing/sputtering out. So far after checking it out, at full throttle the timing goes to the limit, the exhaust port is clean, the carb is clean and opens all the way/including the jets, checked the rings and they are good and both cylinders have 120psi/, and the linkage is adjusted correctly, and finally the reed valve opens and closes. I have used two different fuel sources/tanks & hose with same result. This decrease happened on the water a few weeks ago. I ran across the lake at full throttle and all 25HP then on the way back a sudden decrease in power?! PLEASE help if you think you may have an idea. Thanks,