water pump parts problem

[chobeeboy]

1 have a 1976 135 hp evinrude and im changing the water pump, i can find all the internal parts but i cant find new housing, mine has two holes for water to travel, if anyone could help would appreciate thanks

 

[bktheking]

Re: water pump parts problem

Does it need a new housing?? Is the housing damaged? Of the one's I have done I typically change just the impeller.

 

[chobeeboy]

Re: water pump parts problem

yes it cracked where you bolt down the cap that holds the rubber seals in

 

[bktheking]

Re: water pump parts problem

shop2.evinrude.com lists them as still being available, see below.


0318933 IMPELLER HOUSING ASSY.. Models with "D" Suffix Contents of Water Pump Repair Kit

0385801 IMPELLER HOUSING ASSY.. Contents of Water Pump Repair Kit Models with "G" Suffix

 

[chobeeboy]

Re: water pump parts problem

i tried looking there but i just couldnt find maybe im not looking right

 

[tashasdaddy]

Re: water pump parts problem

http://shop2.evinrude.com/ext/index.aspx?s1=bf6ad09c53cead335fcfd8a6471c0f7f

 

[bktheking]

Re: water pump parts problem

i tried looking there but i just couldnt find maybe im not looking right

Find your year, find your motor model, click on gearcase, look to the left, it shows the pump housing.

 

[F_R]

Re: water pump parts problem

Find your year, find your motor model, click on gearcase, look to the left, it shows the pump housing.

The original aluminum pump housings are no longer made (thankfully). You need to buy a 439140 water pump kit that includes everything to update it to the plastic pump with stainless steel liners. You get it at an Evinrude dealer.

 

[chobeeboy]

Re: water pump parts problem

does any body know how to figure out what G or D suffix i need for my water pump

 

[wilde1j]

Re: water pump parts problem

It's part of the model no. Check the last character on the data plate (port side of mounting bracket or stamped on freeze plug (top aft part of motor). The BRP PL shows the same PN for both variations, so the pump PN F_R posted above probably OK for both.