fin reaper
Cadet
- Joined
- Apr 4, 2010
- Messages
- 11
I have a single small o-ring in the water pump kit that is 7/16" od about 0.25 id. It is not for the vent or fill screws, I have id'd the gaskets in the kit for them already.
Does it go to the flush screw at the water pump - shift shaft above the bushing seal - I'm not sure.
When I tore my lower unit apart I made sure I placed everything in sequential order. After everything was disassembled - I see another small o-ring that I didn't recall seeing in my tear-down that was about the same size.
Does it go to the flush screw at the water pump - shift shaft above the bushing seal - I'm not sure.
When I tore my lower unit apart I made sure I placed everything in sequential order. After everything was disassembled - I see another small o-ring that I didn't recall seeing in my tear-down that was about the same size.