Keyboardman
Petty Officer 1st Class
- Joined
- Sep 10, 2015
- Messages
- 359
Hi all, Just picked up the 75 Stinger which had been laying around un used for years unknown. I drained the lower unit and at first a little clear water came out and then the rest was black oil. Very little filings on the magnet screw. Assuming water has been getting in to the gearcase, what should I look at replacing to remedy the situation. I also have a lower unit on a 1978 75hp Evinrude (condition also unknown right now) I could swap out with if it's any good. Will the Evinrude lower unit fit? It looks the same as the Johnson. Thanks