water coming from lower unit

Pettibone

Recruit
Joined
Sep 21, 2024
Messages
2
I just installed new water pump kit on my 2002 Mercury 25hp 2 stroke. It seems that there should be more pressure coming out the top pee hole. And should water be coming out the hole of the drive shaft housing(mid) unit where the shift rod passes thru to shifter.
 

Attachments

  • 20240921_171241.mp4
    24.4 MB · Views: 0
  • SharedScreenshot.jpg
    SharedScreenshot.jpg
    144.8 KB · Views: 3

cyclops222

Lieutenant
Joined
Mar 21, 2024
Messages
1,289
Getting the tube into correct hole can be a several attempts. To get it into the hole correctly. I had to slightly bend the tube To line up almost perfectly. A slightly frustrating job.
 

Pettibone

Recruit
Joined
Sep 21, 2024
Messages
2
Water tube stayed in place at the top when I removed the lower unit and lined up perfect when reinstalling the lower unit. water is coming out both pee holes. but, water is also coming out from the hole on the front of the gear housing where the shift rod goes thru. I don't recall water ever coming from that location before. Watch the video attached to my OP.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,092
Looks normal. Pee stream won't flow until thermostat opens. Did you make sure the washers are on the impeller? No cracks on the housing
grommet
 
Top