Washer question

[Dleopoldi914]

I was greasing the steering cable and I lost this washer. I connected the cable without the washer. Can I easily get this washer in local marine supplier or do I need to order online?

also where are the grease fittings on my motor? My mercury engine has it listed in the owners manual. This engine doesn’t

the part number for the washer is

28-4	WASHER, 9.6 - 18 - 2 353849160

whst you think ?

 

[ahicks]

For those that might be able to help, it would be much easier knowing what motor you have.

Washer would be available at a lot of hardwares that sell stainless steel nuts and bolts (Lowes, Home Depot, ACE, etc.).

 

[dingbat]

Commercial washer. 316 stainless. You might get lucky and find at big box store but doubt it. Local marine hardware or McMaster Carr on line

 

[pvanv]

353849160m

washer

$2.12

 

[Dleopoldi914]

Ok fixed the washer it was a 5/16. Tohatsu dealer told me. I have the m90a motor do you know where the grease fittings are ?

 

[robert graham]

Look in the area of the motor tilt and the motor pivot....that's usually where zerks are.....try tilting motor all the way up, as that may help to find and access them

 

[pvanv]

Two fittings; one on each arm of the tilt shaft.