Warm or Cold Hard starting 1973 Johnson 135 powershift 2.

Goodtimecharlie

Recruit
Thread starter
Joined
May 21, 2017
Messages
1
I promise I have searched all of the forums to try and find an answer for this issue.

I have recently rebuilt the carburetors on this engine and despite my best efforts, I still have an issue getting this engine to start whether hot or cold. Once I do get the engine running, it idles perfectly, will run at wide open throttle, and never stalls through gear shifts, Etc. I recently put a fuel soaked rag over the intake, and it fires up very reliably. I know this isn't safe, so please help me figure out why this engine is so hard to start. I checked the fuel pump and think it might be the problem. But any insight is very welcome.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The fuel pump starts working once the engine has started !---------So is the THERMO ELECTRIC CHOKE set-op still in service , yes , no , do not know ?--------Is the choke solenoid working ?--------Is the choke solenoid properly adjusted ?----------Finally are the starter / battery / battery cables in good condition ?-----There is a lever for CHOKE ON / CHOKE AUTOMATIC / CHOKE OFF.----Is that in the correct position ?
 
Top