MATT VINES
Recruit
- Joined
- Apr 27, 2010
- Messages
- 3
This thing keeps overheating i have put a new water pump,and pulled all water hoses of and flushed them. And pulled of lower unit to make sure the exsust is clear i have ran water through the manifolds till it runs out the lower unit and it still over heats.i put a new thormastate in it same thing so i pulled it out same thing.i can run it about 4 min. Then it hits 200 to 220 and then alarms at the manifold sensors i can un plug them and no alarm but still gets hot.any help please
