V4 120hp evinrude drops power for a second, then back up again

rfeiler007

Cadet
Thread starter
Joined
Jun 16, 2017
Messages
15
My phone isn't allowing me to upload the pic right now. I pulled the prop off, and the hub appears intact and inside the prop itself
 

ob

Admiral
Joined
Aug 16, 2002
Messages
6,992
My phone isn't allowing me to upload the pic right now. I pulled the prop off, and the hub appears intact and inside the prop itself

But,has it slipped from its original position? A spun hub won't necessarily appear all torn up. If you are unsure of whether it has slipped , while you have the prop off, mark the hub at the point where it presses into the prop barrel and make another mark on the prop barrel at the same location and see if it moves after another water test.
 

rfeiler007

Cadet
Thread starter
Joined
Jun 16, 2017
Messages
15
But,has it slipped from its original position? A spun hub won't necessarily appear all torn up. If you are unsure of whether it has slipped , while you have the prop off, mark the hub at the point where it presses into the prop barrel and make another mark on the prop barrel at the same location and see if it moves after another water test.
since my last post, I hit a rock on the river and took out my lower unit. I have replaced it with a used one with new gears, water pump, and a new prop & prop hub. After all that, I took it out and it STILL does the same thing. So now I have ruled out gears and prop hub. I've been reading up and researching more into this issue, and "fuel pump" keeps coming up. I have the VRO style with the oil line plugged and the alarms disconnected (somebody before me did this). I do not want to replace the whole thing, as I am very comfortable with mixing my gas/oil-and $$ is also a bit of an issue since i had to replace the lower unit. I have researched enough to have found a fuel pump to replace the VRO pump. What are your thoughts on this?
 

ob

Admiral
Joined
Aug 16, 2002
Messages
6,992
My thoughts are if it ain't broke don't fix it. If you suspect a weak or failing fuel pump , next time you take the boat out ,when it acts up and loses speed, try pumping the fuel primer bulb and see if it remedies the problem. This is simply manually acting as a fuel pump to test whether yours is not keeping up at higher speeds.
 

rfeiler007

Cadet
Thread starter
Joined
Jun 16, 2017
Messages
15
Well, any suggestions of what else it COULD be? I feel that I've explored and shut down any other avenues. Thought it was electrical kill switch- seems to be fine, Thought it was the tank being old-replaced it, thought the gears and hub-replaced them and it still has the issue of dropping out at the higher speeds. I had a buddy sit next to the primer bulb with his hand on it, when it dropped the rpm/speed, he said it was rock solid. I'm extremely frustrated as to what else it could be...
 

ondarvr

Supreme Mariner
Joined
Apr 6, 2005
Messages
11,527
Yes' post 7 will answer some questions.

​If the drop in power is sudden, like a switch being flipped, then back to normal in the same way, start looking at electrical components.

​If it's a little slower, and smoother, or surging, then look at fuel.
 

V153

Lieutenant Commander
Joined
Apr 16, 2011
Messages
1,764
Put a timing light on each cylinder when it's acting up and look for black spots. If you have them you have an ignition problem. Not fuel.
Yes it might could be the stator crapping out at higher rpms. It happens.
 

V153

Lieutenant Commander
Joined
Apr 16, 2011
Messages
1,764
Being a looper I wouldn't know chit about the motor anyway ...
 

rfeiler007

Cadet
Thread starter
Joined
Jun 16, 2017
Messages
15
Post 7:Is that something one can do on water? I ask because it won't do it on muffs....
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
It has to be done when the motor is acting up. Best to do it on the water.
 

rpsloan

Petty Officer 2nd Class
Joined
Dec 13, 2012
Messages
102
They always sound great on muffs. Don't let em fool ya ...
Ain't that the truth.

You said after it warms up it doesn't do it anymore correct? I would look at the pulse/power pack. They can cause intermittent power loss when they start to go and it's just like someone killed the ignition and immediately turned it back on.
 
Top