Unclogging Fleetwin

rzsdad

Recruit
Thread starter
Joined
Aug 27, 2011
Messages
1
I have this 1955 Fleetwin 7 1/2 hp motor going. Put it in a bucket of water and when I fired it up water poored out of water jacket at the bottom of the head. It was missing a freeze plug. I installed the 7/16 freeze plug in it and started it up again. No water coming out of exhaust. Could I have a clog? If so how can I clean it out so water will circulate?
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Possible, but not very likely. First thing I would suspect is that bucket. Lower unit must be submerged at least far enough to put the water pump a couple of inches below the surface before starting the motor. Water pump is in the bulge several inches above the flat cavitation plate.
 
Top