trolling motor wiring

cgls333

Recruit
Thread starter
Joined
May 20, 2011
Messages
1
What is the proper way to install the wiring from the 12 volt battery to the 3 way plug on the motor. (fuse, breaker) Why are there 3 pins in the plug... 1 is pos, 1 is neg, what is the third one?
 

Fed up

Petty Officer 2nd Class
Joined
Apr 30, 2010
Messages
189
Re: trolling motor wiring

Typically the third one would be used for a 24 volt system. Some trolling motors (motor guide) have a switch on the foot peddle to switch from 12 to 24 volt operation. So with this option you have to have both positives coming to the plug.

So now that you are only using a 12 volt system feel free to take the third wire and either cut it off or just tuck it out of the way.
 

fishrdan

Admiral
Joined
Jan 25, 2008
Messages
6,989
Re: trolling motor wiring

Correct, for 12V, just forget about the 3rd wire. You need to fuse/breaker the + wire 12" or less from the battery. How long of a wire run is it from the battery to plug and what # thrust is the TM, you need to use the proper size wire to limit voltage drop. The fuse/breaker needs to be sized for the TM also, 40, 50 or 60 amp.
 
Top