trolling motor amps

dimi

Recruit
Thread starter
Joined
Jul 19, 2011
Messages
1
have a 37 lb thrust motor guide trolling motor ,and when trolling on high speed the circuit breaker will pop after a few minutes of continous trolling. I have a 20 amp breaker. Does anyone know what the amp draw is on this motor.
 

fishrdan

Admiral
Joined
Jan 25, 2008
Messages
6,989
Re: trolling motor amps

About 37 amps at motor stall speed. If the wiring is sufficient, I would use a 40 amp breaker. The breaker is to protect the wiring from shorting out and causing a fire, more than to protect the trolling motor from damage.
 

Rick.

Captain
Joined
Jul 30, 2006
Messages
3,740
Re: trolling motor amps

Interesting this would come up today. I was looking at a wind blown tag on my minn kota last night and it said to install a "manual reset breaker". I know I installed a auto re-setting one. I guess this is so the motor is under observation if/when the re-setting occurs? Kind of makes sense when you think about it. Best of luck. Rick.
 
Top