Trim goes down but not up

trikster35

Recruit
Thread starter
Joined
May 30, 2008
Messages
1
Have check @ the pump-have voltage for down, not up--Opened electrical connector near throttle control-- have continuity for down--not up- I tried to remove the throttle control handle (mercury 3000 classic) hence the word tried. Found and removed the set screw in the bottom. Can anyone tell me what else I need to do and if there is any precautions I should take when removing this handle?

Thanks
 

rdny041285

Petty Officer 2nd Class
Joined
Mar 10, 2008
Messages
167
Re: Trim goes down but not up

try switching the relay plugs around and see if it starts to go up instead of down....if this works you need a new relay plug....i had issue with engine wouldnt go up but would go down...paid 20 bucks for new relay put it in and works great now thanks to all the help from everyone opn these forums.
 

Boatin Bob

Lieutenant Commander
Joined
Sep 24, 2001
Messages
1,858
Re: Trim goes down but not up

What are you working on? If this is a Mercruiser does the trailer up work? If so it could be your trim limit switch at the transom is defective or out of adjustment making it think your trying to trim up past the safe limit.
 
Top