Dremmick1985
Seaman Apprentice
- Joined
- May 12, 2020
- Messages
- 38
I am having some issues on my 2005 3.0L serial number 0W306422 engine. I jumped the 2 white wires from distributor, and bypassed the shift switch like the instructions said, runs like crap at 2 degrees atdc. The only way it runs good is setting timing at 10-12 degrees btdc. Do I set idle rpm(750) before base timing mode or during?
I wanted to check the timing since I am having hot start issues. I have replaced the distributor cap, spark plugs, wires and fuel filter.
I wanted to check the timing since I am having hot start issues. I have replaced the distributor cap, spark plugs, wires and fuel filter.