Timing degree setting for link and sync 140 VRO

Tstroh

Cadet
Thread starter
Joined
Jul 3, 2017
Messages
10
Anyone got the magic number for WOT in the water? i don't have the manual yet and I'm anxious to get this thing running good. WOT timing is likely close as it runs great above 2,000 RPM. Idle to 2,000 is poor...runs rough, stalls while shifting. Carbs were gone through and are now spotless. I could use a float height spec if someone knows to be sure. Thanks! (Note: running condition noted is in the water...it runs great on muffs). 1985 140 VRO E140TLCO.
 

Tstroh

Cadet
Thread starter
Joined
Jul 3, 2017
Messages
10
Thanks for the response. Right, but i still need to verify that the WOT is correct. Or at least I want to. Just bought the boat so looking to make sure shes sea worthy
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
The float spec is is with the carb upside down the float should be level. I would also do a compression test.
 

Tstroh

Cadet
Thread starter
Joined
Jul 3, 2017
Messages
10
Ok. Good deal, thats where the floats were at. I'll throw the compression tester on tonight. Thanks
 
Top