Tilt/trim switch on US Marine control box F5H198 or F5H267 i have this control box on a cajun boat 1989 but the force motor was replaced with a 1994 w/115 evinrude! The trim had a short would not power up, relays swapped all good. It took me all day to find the short which was in the black relay box corrosion! However in looking for the short i took the trim switch on the handle out with the two tiny screws thinking that might be the problem! It wasn't.
However after finding the short the switch now sticks sometimes in the up and does not kick out on the up but does on the down! Anyone ever dealt with this very very tiny component, it was not doing that before, my guess is not put back in against a spring or very small metal clip!
However after finding the short the switch now sticks sometimes in the up and does not kick out on the up but does on the down! Anyone ever dealt with this very very tiny component, it was not doing that before, my guess is not put back in against a spring or very small metal clip!
