Tilt on a 140 HP Evinrude

fattirecade

Recruit
Thread starter
Joined
Jul 8, 2003
Messages
2
The tilt will raise fine, going back down if the problem. It does go down but not all the way, but it takes about a 45 sec. It raises in about 10 secs. Sometimes you have to raise it all the way up before it will start down. Any ideas? Thanks ahead of time!
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Re: Tilt on a 140 HP Evinrude

What is the model number of the engine?
 

sharkcat

Petty Officer 1st Class
Joined
May 4, 2003
Messages
285
Re: Tilt on a 140 HP Evinrude

Have you checked the fluid level?
 

fattirecade

Recruit
Thread starter
Joined
Jul 8, 2003
Messages
2
Re: Tilt on a 140 HP Evinrude

The motor is a 1977 model. The fluid level is at the bottom of the fill plug. The motor does have a different sound as it goes down, once it hits the trim tabs, the motor stops lowering.
 

Solittle

Fleet Admiral
Joined
Apr 28, 2002
Messages
7,518
Re: Tilt on a 140 HP Evinrude

Cycle it up and down 5 or 6 times. You may have air in the system that needs to be purged.
 
Top