throttle cables???

sergioy

Petty Officer 1st Class
Thread starter
Joined
Apr 14, 2003
Messages
376
I have just aquired an '83 Caddo that used to have a Mercury in it. But now that i've got I am in the process of putting on a '88 40 hp Evinrude. Now the only thing that was missing on this boat was the motor. Everything else was still on it: ignition, throttle controls... So when I put the motor on I realised that the ignition cable on Evinrudes and Mercuries is backwards. At the motor i've got two male connections. <br />So I have undertake the task of swithing out the controls. Which is actually harder than what it seemed originally. I am unable to take the mecury controls out of the boat. They were built in pretty well. Any suggestions from those of you who may have done this already :confused:
 

Hooty

Rear Admiral
Joined
Oct 2, 2001
Messages
4,496
Re: throttle cables???

I think those are Amphenol plugs so you might try an electrical supply house for the female plug and the insertion tool but everything else is just going to be point to point wiring. I doubt you'll be able to use the Mercury cables on the OMC engine.<br /><br />c/6<br /><br />Hooty
 
Top