Thread Size

lorrieandfrank

Recruit
Thread starter
Joined
Jul 25, 2003
Messages
1
I have a 1979 55Hp 2 cyl. Johnson I'm having stator problems. What size bolts do i need to pull the flywheel. I think it's 1/4inch SAU. The reason im asking is that thereis some corrosion on the shreads. I need to tap them, and i dont want to jack them up. Thank's
 

bhalsdorf

Petty Officer 1st Class
Joined
Mar 6, 2003
Messages
251
Re: Thread Size

Just be carefull not to cross thread the holes or you may end up with not enough good threads to take the pressure and they will strip out. Go slow and easy with the tap and you should be ok. Also back it out often and clean out the loose grit you create or the tap may bind and snap on you. Then you will be in more trouble than you started with.
 

bubbakat

Captain
Joined
Oct 29, 2002
Messages
3,110
Re: Thread Size

go to auto parts store and buy a thread chaser not a cutter take one of the bolts with you.<br /> put a little oil on it and work gently and slowly and you should be able to reclaim most of the threads.
 
Top