DekeMeister
Cadet
Thread starter- Joined
- Mar 19, 2018
- Messages
- 7
My pontoon has a 2004 Johnson 50hp 4str and I'm having a problem with rpm readings. First off when I bought the boat the tach would read 5400 rpm wide open when manual says should be around 6000 with a 13p prop, which it had. Replaced the prop with a flatter 10p recommended by a dealer who looked up the numbers in his catalog and now the rpm reads 5000 wot yet speed is a couple mph faster (18)! Go figure. Should have given me about 4-6 hundred more rpms. Now I'm thinking I may have a tach issue (2004 Bennington 18.5) so I bought one of those Tiny Tachs that hook to a spark plug wire, but that won't work as my motor is coil-on-plug, hence no high tension plug wires. Motor runs great. Starts right up, idles fine, and runs good throughout the power band. Does anyone have any advice how I can determine if my tach is reading right or maybe somewhere else I can hook the Tiny Tach to or do I just install it on my zero turn? Any input much appreciated.
Thanks,
Deke
Thanks,
Deke