Hi all,
anyone know how to isolate the oil flow sensor on a 1997 DT65? and reset the rev limiter.
Enough is enough, I have replaced and checked everything and the oil flow light and buzzer still sounding, and putting the engine in limp mode, I have put new oil flow sensor, temp switch, water flow switch and striped and checked all the pipe work and tank at least 5 times, After two months I have decided to change to premix and do away with the oil pump. the pipework conversion is an easy one, but I needs to bypass the rev limiter or and the oil flow sensor, two wires coming from the oil sensor one blk which is earth and one pink which has 1-2 volts when engine running.
I would really appreciate any help or advice.
thanks tony
anyone know how to isolate the oil flow sensor on a 1997 DT65? and reset the rev limiter.
Enough is enough, I have replaced and checked everything and the oil flow light and buzzer still sounding, and putting the engine in limp mode, I have put new oil flow sensor, temp switch, water flow switch and striped and checked all the pipe work and tank at least 5 times, After two months I have decided to change to premix and do away with the oil pump. the pipework conversion is an easy one, but I needs to bypass the rev limiter or and the oil flow sensor, two wires coming from the oil sensor one blk which is earth and one pink which has 1-2 volts when engine running.
I would really appreciate any help or advice.
thanks tony