stupid question - trailer lights

[Mc Tool]

i had to look it up

Why the Difference Exists

• 
  
  • Tow Vehicle (3-Wire System): Many cars, trucks, and RVs—especially imports or vehicles with amber turn signals—have distinct circuits for the left turn signal, right turn signal, and the brakes.
  • Standard Trailer (2-Wire System): Standard flat 4-way trailer wiring combines the stop and turn functions onto a single yellow wire (left) and a single green wire (right). [1]

Why You Need a Converter

• 
  
  • If you plug a 3-wire vehicle directly into a 2-wire trailer without a converter, your turn signals and brake lights will not function correctly.
  • Stepping on the brake might override your flashing turn signal, or turning on your blinker might cause your brake lights to flash.
  • A 3-to-2 Wire Taillight Converter safely merges the separate brake and turn signals from your vehicle into the combined circuits required by the trailer. [1]

Oh yeah ,I forgot you guys wire up your lights all wrong , coz we separate the brake , tail and turn lights . Gotta say tho that I see quite a few US import cars and some big trucks now have the flashing brake light set up too

 

[airshot]

Oh yeah ,I forgot you guys wire up your lights all wrong , coz we separate the brake , tail and turn lights . Gotta say tho that I see quite a few US import cars and some big trucks now have the flashing brake light set up too

Just recently noticed the flashing brake lights on some vehicles. Probably a good idea as to many are not paying attention or on their phones. Something is needed to wake people up !

 

[Mc Tool]

Just recently noticed the flashing brake lights on some vehicles. Probably a good idea as to many are not paying attention or on their phones. Something is needed to wake people up !

I meant that ....in NZ we have yellow turn signal indicators , the US imports ( Dodge Challenger for instance ) dont , they flash the brake light at the rear and the side light ( we call them park lights ) at the front . Different but still obvious what the intention is .

 

[redneck joe]

this is why i hate

 

[redneck joe]

This is for my new to me utility trailer and on the new tail lights of course there are three wires and the directions do not tell of what to do with them. Had this been the early 80s when i was doing my first ones i would have been clueless and prob blown fuses and bulbs.


ok, off to deal with the old rusted carriage bolts on whats left o the old ones.

and i knocked over my (fake) beer.

 

[airshot]

That thing could be an interface for trailer lights . If your vehicle has led lights it wont like having high drain incandescent bulbs on a trailer hooked up so they have this box that powers the trailer lights .....like a bunch of relays ....gets a power feed from battery

If anyone's trailer still has incandescent lights....time to upgrade ! Not that expensive to do, or at least upgrade to led bulbs! You won't be sorry. Switched all my trailers over about 10-12 years back...no regrets and not on problem since the change over. Before I did this, I was replacing bulbs every few years and having other socket issues. Now, I always know my lights will work.....

 

[alldodge]

You pic shows a 5 wire plug which is made for surge disc brakes and would use solenoid so the trailer could be backed up.

You want a 4 wire plug

 

[redneck joe]

it is a 4 slot plug, i believe the red/brown since wired together would be 'brown' of the diagram.