Stuck Gear

Sdewey2

Cadet
Joined
Oct 24, 2024
Messages
9
I fixed the impeller, but sadly now my johnson 25hp motor will not come out of reverse. I can move the gear and it feels like it is changing, but it just keeps reversing. It doesn't appear anything is broken, I am wondering if I put the lower unit in the wrong way.
 

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,640
Not sure you can install it wrong really. Did you turn the shift shaft stub that comes out of the gearcase maybe?

Is this tiller or a remote motor?
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,818
Is this a 1953 ----1970 -----1996 -----2003 model ???-----Describe how you hooked up the shift linkage.
 

Sdewey2

Cadet
Joined
Oct 24, 2024
Messages
9
it is a 1996 model. I am pretty new to boats, but all I know is when I put the lower unit back on, the motor goes right into reverse every time I start it up.
 

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,640
Send us a picture of the area where you put the shift shaft back together. Did you loose the small plastic keeper?
 

Sdewey2

Cadet
Joined
Oct 24, 2024
Messages
9
I did read something where you should be able to move the prop with your hand when the boats are off and in neutral. If that's the case then I am unable to do that.
 

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,640
While in neutral, yes.

I would recheck your connection, keeper in, keeper nuts are properly set.

If they check out, once again, did the shaft that was in your gearcase when you pulled it for the impeller replacement, get turned or removed? If so, that's your problem.
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,818
The lower shift rod should be screwed all the way into the lower unit.-----Make sure it does not turn while assembling the coupler.----A 2 or 3 cylinder motor??----Model # is required here.----Is this a " new " to you motor ?
 
Top