tbstudmuffin
Recruit
- Joined
- May 9, 2006
- Messages
- 2
Hello<br />I just purchased a 1976 fibreform 25 ft powered by a 225D (350 GM V8) and a 290 Volvo stern drive. The steering ia very stiff. Hard to turn take a lot of muscle power to steer this thing. I dismantle the whole thing pulled the cable out disconnected from the leg. Cable was stiff. Cleaned it lubricate it works good. From outside I can turn the lag from side to side with very little force. But from inside just about impossible to make it move. I am looking for advise and or books or manual available to help fix the problem. And is it possible to install a power or hydraulic steering to this set up if yes witch one.<br />Thank you