Starting problems

Lanemontes

Recruit
Thread starter
Joined
Jan 21, 2017
Messages
1
I believe it's a 1968 40hp johnson..can't get power to starter so I ran jumper cables directly to the starter to make sure it's still turns over but nothing..not even sparks come from it what could cause this..get spark touching anything else..any advice would be greatly appreciated
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Remove the starter, take it apart and look for a stuck brush.
 

HighTrim

Supreme Mariner
Joined
Jun 21, 2007
Messages
10,486
If you are using good cables capable of carrying enough juice, that are making a good connection, and you have a good battery, as boobie states, your starter needs to be opened up.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
jumping directly from the battery to the starter, right? Positive to the starter stud, and neg to the starter case or mounting bracket? (want to test only the starter, not the starter circuit or ground circuit.)
 
Top