Splitting Block On 200 Ficht

jloula

Recruit
Thread starter
Joined
Mar 28, 2016
Messages
2
I lost compression in one cylinder on my 2000 200hp Ficht. Took the head off and there is a hole burnt through the piston in the middle cylinder on the left side. I've had this motor rebuilt once and a lot of other parts along the way. I've decided to not pay someone to rebuild it again. I'd like to separate the block to see the backside of the piston as I may just replace that one piston.
My question is, Can the block be split with it sitting in engine compartment as is? Or do you need to remove the block completely from the engine compartment to make it possible? Thanks for any input
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Powerhead must be removed for this job.------Plus you must find out why this happebed or you will be doing the job again.
 
Top