splicing ignition harness?

rtw-02

Recruit
Thread starter
Joined
Nov 26, 2009
Messages
2
Hello everyone,
Can I splice a 10 foot section into a new mercury quicksilver 14 pin, non dts, key switch and harness?
reason being a new 20 foot harness is $200 and a 30 foot harness is $800:eek:
Thanks from a new guy
 

Dunaruna

Admiral
Joined
May 2, 2003
Messages
6,027
Re: splicing ignition harness?

$800 :eek:

If you are handy with a soldering iron and shrink tube, anything is do-able.
I can think of no reason why you cannot just cut and join.
 

triman

Petty Officer 2nd Class
Joined
Sep 30, 2002
Messages
124
Re: splicing ignition harness?

If it is just a straight DC harness, I don't see why not.
If you're talking high-tech stuff with tuned cable lengths, like GPS antennae or fishfinder transducer cables, I wouldn't be trying it, but this sounds relatively simple.
Just make sure all the joints are tight and waterproofed.
 

HONKER1

Petty Officer 1st Class
Joined
Apr 1, 2007
Messages
245
Re: splicing ignition harness?

How about getting a 14 pin male and female connectors and making a extension cord. Or get what you need to extend the reouired length at a boat salvage yard.
 

rtw-02

Recruit
Thread starter
Joined
Nov 26, 2009
Messages
2
Re: splicing ignition harness?

Thanks for the answers guys.
I found out that a 40 foot harness (part #896537t40) is $250 ???
No one that I spoke to at the dealers or part stores could tell me why the 30 footer ( part #896537k30) is so expensive.
I am assuming it must have builtin smartcraft capabilities, or it is a price error in the merc part system catalog?
Cheers
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: splicing ignition harness?

Sure you can add a section. But here's a tip. Do not cut all wires in the same spot. Stagger them so you don't end up with a big ball at the splice points. Makes a much neater looking cable when you are done.
 
Top