Spark Problem Johnson 25 tiller

juno pierrat

Petty Officer 1st Class
Joined
Dec 14, 2013
Messages
355
during carb cleaning have you removed the core plug, some very small holes there that need the cleaned (wire treatment), they can be reached from the back of the carb, from reading posts over the years i think they are part of the idle circuit
 

BottomFeedersFishing

Cadet
Thread starter
Joined
Dec 5, 2015
Messages
10
Thanks for the replies. As far as the fuel pump diaphram everything there has been replaced already. But. What I have found was when I re did all the o rings in the pull choke (replaced same time as the power pack) on the end of the "metal plunger" was a quad ring and then at the very end of the "plunger" was a spot for an o ring which the diagram showed was supposed to be there. So I ordered them all and installed them all including the one that wasn't there before. Today I took that o ring out and it ran fine. Weird.
 
Last edited:
Top