Spark plug wire routing

[bobjones294]

Does anyone have a drawing of spark plug wire routing for a 1961 Evinrude 18 H.P. Fastwin model 15034?
Regards, Bobjones

 

[kbait]

Re: Spark plug wire routing

Evinrude Magneto Parts for 1961 18hp 15034 Outboard Motor

Top cylinder wire connects to top coil (front coil nearest throttle cam on armature plate).

Good luck!

 

[bobjones294]

Re: Spark plug wire routing

I meant after it leaves the armature plate. Do wires dive down when leaving the plate? Do they go down before or after fuel bowl?
Regards, Bobjones

 

[gm280]

Re: Spark plug wire routing

Okay not exactly sure how your 1961 Evinrude engine is wired, but here are two pictures of how my 1976 Johnson 40 HP was wired before I disassebled it to rebuild... Hope this does help you out...

 

[bobjones294]

Re: Spark plug wire routing

Thanks for tying but my Ignition coils are mounted on the armature plate and rotate back and fourth with throttle / spark advance mechanism. This is why the spark plug wire routing is important because they rube back and fourth with throttle movement.
Regards, Bobjones

 

[HighTrim]

Re: Spark plug wire routing

Bob it is not all that important. Just leave enough slack for the mag plate movement. I like to keep them tucked in as well.

 

[bobjones294]

Re: Spark plug wire routing

Bob it is not all that important. Just leave enough slack for the mag plate movement. I like to keep them tucked in as well.

Thank you all for your time and effort.
Regards, Bobjones