Spark plug issue

Powershouse

Recruit
Joined
Sep 21, 2021
Messages
4
I have a 1995 Model 25M, serial 0G264401.
The plugs that are in the engine are BP8HN-10. I ordered some fresh plugs and was looking up the gap setting and manual I found says the correct plug is B7HS-10!
So now I am wondering what the correct plug to use is. The boat seemed to run fine this past season (my first as owner) with the BP8HN-10. Could a previous owner have put the wrong plug in, or is this plug an improvement in some fashion?
 

Powershouse

Recruit
Joined
Sep 21, 2021
Messages
4
Going down the spark plug rabbit hole I have learned that the 7 and the 8 refer to the temperature range of the spark plug and that for NGK the 7 runs hotter than the 8. When I removed the BP8HN plug it was black and oily which would seem to indicate that a hotter range plug such as the B7HS would be in order. Am I on the right track?
 

Sea Rider

Supreme Mariner
Joined
Sep 20, 2008
Messages
12,345
The difference with both spark plugs is that the BP has a protuded extended tip whereas the latter is the standard tip. Use whichever one including its heat range the factory recommends going for for said motor tu run well as was designed to do. If it's a 2 stroke motor will find blackened plugs doesn't matter which plugs are in use, it's the spirit of such filthy motors...

Happy Boating
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,092
There is a service bulletin for those motors. Your plugs should not be black all the time. Black plugs are indicative of a rich running motor.
 

Attachments

  • 20220329_174422.jpg
    20220329_174422.jpg
    1.9 MB · Views: 8
Last edited:

Sea Rider

Supreme Mariner
Joined
Sep 20, 2008
Messages
12,345
There is a service bulletin for those motors. Your plugs should not be black all the time. Black plugs are indicative of a rich running motor.
2 stoke spark plugs tips ends being fouled with oil which gives a darkened black color looking, not black plugs though. Use the spark plug brand and type specified by the menufacturer...

Happy Boating
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,092
2 stoke spark plugs tips ends being fouled with oil which gives a darkened black color looking, not black plugs though. Use the spark plug brand and type specified by the menufacturer...

Happy Boating
What motor did you have that them tips were blackened? Because mine all run a nice tan color.
 

Sea Rider

Supreme Mariner
Joined
Sep 20, 2008
Messages
12,345
What motor did you have that them tips were blackened? Because mine all run a nice tan color.
Mine too, just used the wrong wording for fouled looking, but the nice tan looking color will turn into a much darkened tan color due to carbon build ups over run hours which is normal, some 2 stroke oil fouls tips more than others along the fuel/oil ratio used.

Happy Boating
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,818
Thermostat is shown in parts book.-----Thermostat in place and working properly ?-----Or missing / stuck open ?
 

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,904
Oil will not change the color of the plugs, combustion temp, oil ratio and A/F ratio determine color of plug.
 
Top