Spark on only one cylinder

Snookstalker88

Recruit
Thread starter
Joined
Feb 25, 2016
Messages
4
Hi, new to the forum...
I have a 1994 Johnson 200 Ocean Runner. Am only getting spark on the middle cylinder on the port side. Assumed it was the power pack...put on a new one but still have the same condition.
Any help in diagnosing this condition would be appreciated.
Thanks, Dan
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
:welcome: Snookstalker88 to iboats...

You have a timer base and sensor assembly as well as a stator assembly. Have you tested any of those parts? If you already changed the power pack, then it has to be something that is feeding the power pack. So I would look at the timer base myself. Did you replace the power pack with a new one or used? Also go over every possible connector and terminal and clean them to bright shiny metal and secure them back again. Even the grounds as well. Amazing how many boaters have electrical problems traced back to iffy grounds. JMHO!
 

Snookstalker88

Recruit
Thread starter
Joined
Feb 25, 2016
Messages
4
I have not tested any of the other parts (nor do I know how) Could you instruct me on how to test those? I did replace the power pack with a new one. Would like to know the basics of how the system works if you could give a brief explanation. I don't' understand how power is getting to the power pack but from there is only getting to one plug.
I will also go over all the connections as suggested.
Thanks, Dan
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Go to cdIelectronics.com for good trouble shooting procedures on electrical.
 
Top