Solenoid

Dcblanton

Recruit
Thread starter
Joined
Apr 19, 2017
Messages
2
I have a 2006 4.3 mercruiser i was hearing a clicking when turning the key over. I went ahead and replaced the starter and the solenoid but I'm still hearing clicking I tightened up ever bolt I could find but when I hook a volts meter to the solenoid I get 12 on the hot side and 5 on the other is there something I'm missing?
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
53,423
sounds like you wasted money on a new starter and solenoid. problem sounds like either discharged battery or bad connection

make sure your battery is fully charged and in good shape (have it tested)

then proceed by disconnecting every connection and cleaning them. start with the battery posts, then the cable between the battery to motor, motor to helm and back.

clean them to shiny metal, clean enough to eat off them, then when you bolt them back together, use marine electrical varnish to seal the connection.
 

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,563
Did you replace the slave solenoid? There is a slave that fires the starters solenoid.
 

Dcblanton

Recruit
Thread starter
Joined
Apr 19, 2017
Messages
2
Yes I replaced the slave solenoid and starter all together. And I replaced the solenoid. I'm not getting 12v to the yellow and red wire on the solenoid also my trim isn't working. Just Clicking. I have the battery on the charger so it shouldn't be an issue. I'm going through checking commections and cleaning them again.
 

Rick Stephens

Admiral
Joined
Aug 13, 2013
Messages
6,118
Sounds like a cruddy ground. Clean and clean again, like Scott said - shiny bright.

Have your battery tested. Nothing worse than walking back with the family on a pleasure outing.
 

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,563
There should be constant 12v on the heavy Red wire at the slave . The heavy Yellow/red goes to the starters solenoid. Shorting the 2 large lugs should fire the starter. Yes or No
On the starter is the starter solenoid, and before that is the slave solenoid. what did you replace?
 
Top