Smoking DPDT switch

stratos279vf

Recruit
Thread starter
Joined
Apr 6, 2011
Messages
1
Does anyone have the correct way to wire around a bad dpdt switch (charge/run) for a 89 stratos 279vf. Mine started smoking one day while charging due to a bad switch and was told by boat repair shops that this switch has been a major cause of a lot boat fires and was advised to do away with it. I don't like to pay out money for a job that I can do myself and use that money for something else like boat fuel
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: Smoking DPDT switch

Manufacturers didn't publish wiring diagrams for their boats because the wire harnesses were typically done by outside firms. We have no idea what this panel looks like so pictures of the front and back are necessary. However, if the unit worked before, you simply replace the switch with a the same DPDT switch. Doesn't need to match what you have as long as its a DPDT. Move one wire at a time from one post on the old switch to the same terminal on the new one. Make sure that switch is a heavy duty switch as it carries high current. If you have a troller that operates on ONLY 24 volts you can eliminate the switch but more info is needed about the battery to bow panel wiring.

1) From the batteries: Do you see two wires, three wires or four wires?
2) What charger are you using
3) What other switches are provided on that bow panel?
 
Top