I got my '63 75hp Evinrude running today, after replacing the impeller and getting the lower unit back on. I had to start it at fairly high throttle, and it wouldnt go all the way down to minimum throttle, so I think I need to clean the carbs. Fortunately, there was water from the exhaust hole, and the head didn't get too hot to touch.<br /><br />But, I noticed a lot of smoke coming from the lower unit. I had the bottom of the motor in a big bucket of water, and could see lots of smoke coming out of the water. What could this mean? I know I need to at least change the fluid/oil in the lower unit. <br /><br />Thanks<br /><br />Mark