Just installed new set of 1290-80 smart tabs on my 2006 Rinker 226. the boat has a 260 hp 5.0 liter engine. Have a 19 pitch prop. My boat seems to be transom heavy since motor and fuel tank sits toward the back..I installed the smart tabs because i was having porpoiseing and lots of bow rise without people sitting in the front. After installation I took the boat out on some pretty rough water with 4 people sitting in the cockpit of the boat. with trim all the way down bow rise was somewhat improved but ride and porposeing was not...; Current settings are in the middle for tab angle and all the way out from the transom for lift pressure. Can anyone help me with answers to the proper adjustment?