FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Mine has a simple set up with a 48" solid bar pylon that slips into a base screwed into the floor and to the bottom lip of the storage bay. About 1/2 way up there is a set of supports that angle back and bolt through the transom on either side of the motor. The iBoats Swivl-eze looks like an upgraded but similar design.
thanks for the reply - i did see one like that - was a little worried about screwing it to the deck b/c the gas tank is right there - about what length of screws does it use and does it fasten securely ?
thanks for the reply - i did see one like that - was a little worried about screwing it to the deck b/c the gas tank is right there - about what length of screws does it use and does it fasten securely ?
I'm not sure about the length (I know that the tank doesn't leak). If the ones you get are too long (greater than 3/4" or so) they could be repalced with shorter SS Screws.