Shore power vs generator amps.

potc

Recruit
Thread starter
Joined
Nov 29, 2010
Messages
1
Can anyone help me troubleshoot my amps problelm. When I am plugged up to the shore power with 2 30 amp cords, I can run both my AC's and pull about 25 amps. However, when I run on the generator and run both AC's, I pull 30 to 31 amps and then it pop's the breaker. I know that you can not strart both ac's up at the same time and I don't. I start one up, wait a while and then start the other up. As I say running on shore power works great and pull 25 amps but on the genset, they pull 30 amps.
 

Fireman431

Rear Admiral
Joined
Sep 17, 2007
Messages
4,292
Re: Shore power vs generator amps.

It sounds like you may have a problem in one of your A/C's. Run one at a time and see how many amps it draws (and what is it supposed to draw?). When I run both of mine (a 12K and a 16K) I don't draw more than 20 combined.

The power provided by landbased electrical connections is a bit more stable than a genset, but the power/amp usage should be the same.

If the compressor starts going bad, that will cause it to draw more amps as well.
 
Top