riversidetransmission
Recruit
Thread starter- Joined
- Nov 1, 2017
- Messages
- 1
I bought a boat not running . Seller had removed lower unit to install water pump , and replaced fuel tank that was under the liner with one under the center console . He said had shifting problems because cables hit the new tank , but they look fine to me . It was leaking water from lower unit so I pulled it and found exhaust seals installed wrong (easy fix) . Now I can't seem to get the linkage rod to go back into that little hole on the piece going down to the lower unit , it just flops around. Motor is 97 115, HLEUA . Also cables were off when I got it , how do I adjust them ? Seems like the shifter handle at the helm has 2 detents rather than one for neutral .